Alex Guo

From Murmann Mixed-Signal Group

Revision as of 10:03, 9 August 2013 by Alexguo (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Alex.JPG

BSEE, Tsinghua University, 1996
MSEE, University of Toledo, 1998
Admitted to Ph.D. Candidacy: 2007-2008

Research: Densely Integrated Interface Circuits for Aerospace Structural Health Monitoring

A promising approach in aerospace Structural Health Monitoring (SHM) is embedding a large-scale piezoelectric transducer array into the aircrafts’ structure to detect defects during service. Building the interface electronics of the large-scale array in IC form is essential to the embeddability of the whole system. The challenge is driving the piezoelectric transducer with a precise waveform at high voltages and ultrasonic frequencies. We propose a solution using pulse width modulation (PWM), in which the tone-burst signal is rendered by a series of precisely timed pulses. A calibration technique is introduced to achieve sub-nanosecond timing accuracy and -40.5 dB signal distortion.

We fabricated a four-channel, ±36 V, 780 kHz piezo driver chip in 0.25 micron BCD (Bipolar-CMOS-DMOS) technology. The IC was successfully evaluated within a application test bed.

SHMoverview.JPG


Email: alexguo AT stanford DOT edu

Personal tools