R

From FarmShare

(Difference between revisions)
Jump to: navigation, search
(R Sample Job)
(Installing CRAN Packages)
 
(16 intermediate revisions not shown)
Line 1: Line 1:
 +
== Which R are you using? ==
 +
Try run
 +
  which R
 +
Try run
 +
  R --version
 +
 +
As of 2014-07, we have two versions of R installed.  If you do nothing, you'll get the default R that comes with Ubuntu 14.04, which is R v3.0.2, and includes a lot of R libraries which are distributed by Ubuntu.
 +
 +
As of 2015-01 we have a second newer version available, v3.1.2, available via 'module load r'.  This also includes rstudio.
 +
 +
To use the newer version:
 +
  log in with X11 forwarding or via [[FarmVNC]]
 +
  module load r
 +
  rstudio
 +
== Looking at installed packages ==
== Looking at installed packages ==
Line 8: Line 23:
We have a lot of packages already installed, you can ask us to install more, or just install them quickly in your homedir.
We have a lot of packages already installed, you can ask us to install more, or just install them quickly in your homedir.
-
== Which R are you using? ==
+
You can also use
-
Try run
+
<source lang="r">
-
  which R
+
libPaths();
-
Try run
+
</source>
-
  R --version
+
to check which directories R will look in. https://stat.ethz.ch/R-manual/R-devel/library/base/html/libPaths.html
== Installing CRAN Packages  ==
== Installing CRAN Packages  ==
Line 20: Line 35:
install.packages("package_name", dependencies = TRUE)
install.packages("package_name", dependencies = TRUE)
</source>  
</source>  
-
R initially attempts to install to /usr/local/lib/R, and you don't have permissions to write there, so it will prompt for the creation of a library subdirectory in ~/R (if necessary) and fall back to installation there when the initial attempt fails. If your package requires dependencies available from the standard Ubuntu [http://packages.ubuntu.com/ repositories] you can e-mail us requesting installation.  We can install from the Debian/Ubuntu package repositories or into the shared FarmShare filesystem.
+
R initially attempts to install to /usr/local/lib/R, and you don't have permissions to write there, so it will prompt for the creation of a library subdirectory in ~/R (if necessary) and fall back to installation there when the initial attempt fails. If your package requires dependencies available from the standard Ubuntu [http://packages.ubuntu.com/ repositories] you can e-mail us requesting installation.
You can, of course, install R libraries into any arbitrary path and just add that path to your R env.  That will probably break the next time R is upgraded to a new version, since your packages are built with the older version.
You can, of course, install R libraries into any arbitrary path and just add that path to your R env.  That will probably break the next time R is upgraded to a new version, since your packages are built with the older version.
-
NOTE: when you install a package in corn, it will be available to you in Barley.
+
If you have trouble with some kind of SSL error, you can explicitly specify an HTTP mirror, e.g.
 +
  install.packages("spatstat", dependencies=TRUE, repos="http://cran.cnr.Berkeley.edu/")
== R Sample Job  ==
== R Sample Job  ==
Line 89: Line 105:
>  
>  
 +
</pre>
 +
 +
And here's the e-mail I get about the job, you can see the runtime and memory usage:
 +
<pre>
 +
Job 2029205 (r_test.script) Complete
 +
User            = chekh
 +
Queue            = saucy.q@barley12.Stanford.EDU
 +
Host            = barley12.Stanford.EDU
 +
Start Time      = 07/10/2014 12:54:31
 +
End Time        = 07/10/2014 13:00:08
 +
User Time        = 00:00:29
 +
System Time      = 00:00:06
 +
Wallclock Time  = 00:05:37
 +
CPU              = 00:00:35
 +
Max vmem        = 8.107G
 +
Exit Status      = 0
</pre>
</pre>
Line 109: Line 141:
# mail this address
# mail this address
-
#$ -M chekh@stanford.edu
+
#$ -M $USER@stanford.edu
# send mail on begin, end, suspend
# send mail on begin, end, suspend
#$ -m bes
#$ -m bes
Line 147: Line 179:
R --vanilla --no-save < R-jags.R
R --vanilla --no-save < R-jags.R
</source>
</source>
 +
 +
== Jupyter ==
 +
 +
R can also be run in a [https://jupyter.org Jupyter] notebook on FarmShare servers and used via a web browser.
 +
 +
[https://irkernel.github.io IRkernel] is available as part of the prebuilt Jupyter environment accessible via the [[Jupyter| Jupyter installation guide]].
== Links  ==
== Links  ==
Line 198: Line 236:
*make
*make
*write /farmshare/software/mf/saucy/r/3.1.1.lua
*write /farmshare/software/mf/saucy/r/3.1.1.lua
 +
*also added rstudio
 +
===2015-02-03===
 +
Added R 3.1.2 as above to Ubuntu 14.04.
 +
===2015-07-13===
 +
As chekh on corn25 (oldest CPU)
 +
  cd /farmshare/software/free/r
 +
  wget http://cran.r-project.org/src/base/R-3/R-3.2.1.tar.gz
 +
  tar zxvf R-3.2.1.tar.gz
 +
  cd R-3.2.1
 +
  ./configure --enable-R-shlib
 +
  make
==lapack issues==
==lapack issues==
Line 216: Line 265:
$ R --no-save < lapack.r  
$ R --no-save < lapack.r  
</pre>
</pre>
 +
 +
==links==
 +
*proclus - http://web.stanford.edu/group/proclus/cgi-bin/mediawiki/index.php/Software-R
 +
*sherlock - http://sherlock.stanford.edu/mediawiki/index.php/R

Latest revision as of 22:00, 22 June 2018

Contents

Which R are you using?

Try run

 which R

Try run

 R --version

As of 2014-07, we have two versions of R installed. If you do nothing, you'll get the default R that comes with Ubuntu 14.04, which is R v3.0.2, and includes a lot of R libraries which are distributed by Ubuntu.

As of 2015-01 we have a second newer version available, v3.1.2, available via 'module load r'. This also includes rstudio.

To use the newer version:

 log in with X11 forwarding or via FarmVNC
 module load r
 rstudio

Looking at installed packages

You can see the list of installed R libraries by the library() call in R

library();

We have a lot of packages already installed, you can ask us to install more, or just install them quickly in your homedir.

You can also use

libPaths();

to check which directories R will look in. https://stat.ethz.ch/R-manual/R-devel/library/base/html/libPaths.html

Installing CRAN Packages

Most CRAN packages can be installed per-user by running install.packages() in an interactive session:

install.packages("package_name", dependencies = TRUE)

R initially attempts to install to /usr/local/lib/R, and you don't have permissions to write there, so it will prompt for the creation of a library subdirectory in ~/R (if necessary) and fall back to installation there when the initial attempt fails. If your package requires dependencies available from the standard Ubuntu repositories you can e-mail us requesting installation.

You can, of course, install R libraries into any arbitrary path and just add that path to your R env. That will probably break the next time R is upgraded to a new version, since your packages are built with the older version.

If you have trouble with some kind of SSL error, you can explicitly specify an HTTP mirror, e.g.

 install.packages("spatstat", dependencies=TRUE, repos="http://cran.cnr.Berkeley.edu/")

R Sample Job

Here's an example R file that generates a large array, fills it with some random numbers, then sleeps for 5mins. This happens to use up almost exactly 8GB of RAM. And you know it's going to run for about 5 mins.

Save this as 8GB.R:

x <- array(1:1073741824, dim=c(1024,1024,1024)) 
x <- gaussian()
Sys.sleep(300)

Here's an example SGE submit script that runs that R file.

#!/bin/bash

# use the current directory
#$ -cwd
#$ -S /bin/bash

# mail this address
#$ -M $USER@stanford.edu
# send mail on begin, end, suspend
#$ -m bes

# request 8GB of RAM, not hard-enforced on FarmShare
#$ -l mem_free=8G

# request 6 mins of runtime, is hard-enforced on FarmShare
#$ -l h_rt=00:06:00

R --vanilla --no-save < 8GB.R

You can submit it with just

 qsub r_test.script

Here are the output files that I get, one from stderr, one from stdout

$ cat r_test.script.o2029205 

R version 3.0.1 (2013-05-16) -- "Good Sport"
Copyright (C) 2013 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> x <- array(1:1073741824, dim=c(1024,1024,1024)) 
> x <- gaussian()
> Sys.sleep(300)
> 

And here's the e-mail I get about the job, you can see the runtime and memory usage:

Job 2029205 (r_test.script) Complete
 User             = chekh
 Queue            = saucy.q@barley12.Stanford.EDU
 Host             = barley12.Stanford.EDU
 Start Time       = 07/10/2014 12:54:31
 End Time         = 07/10/2014 13:00:08
 User Time        = 00:00:29
 System Time      = 00:00:06
 Wallclock Time   = 00:05:37
 CPU              = 00:00:35
 Max vmem         = 8.107G
 Exit Status      = 0

Another R Sample Job

R script, let's call it R-rjags.R

print("Hello World")
library(rjags)
#this just loaded some settings from that library
print("Finished")

Job script, let's call it R-jags.submit.script

#!/bin/bash

# use the current directory
#$ -cwd
#$ -S /bin/bash

# mail this address
#$ -M $USER@stanford.edu
# send mail on begin, end, suspend
#$ -m bes

R --vanilla --no-save < R-jags.R

Submit it to the test queue with a small memory requirement:

 qsub -l mem_free=200M -l testq=1 R-jags.submit.script


Looking at the output files, it errored out because R can't find the package rjags. You have two alternatives:

  • include the R library from /mnt/glusterfs/software
  • use modules to specify the full R install from /mnt/glusterfs/software

The first way, you would add this line to your R script:

 .libPaths(c("/mnt/glusterfs/software/free/R-2.15.0/lib/R/library", "/usr/lib/R/library"))

The second way, your script will look like this:

$ cat R-jags.submit.script
#!/bin/bash

# use the current directory
#$ -cwd
#$ -S /bin/bash

# mail this address
#$ -M chekh@stanford.edu
# send mail on begin, end, suspend
#$ -m bes

eval `tclsh /mnt/glusterfs/software/free/modules/tcl/modulecmd.tcl sh autoinit`
module load R-2.15.0
R --vanilla --no-save < R-jags.R

Jupyter

R can also be run in a Jupyter notebook on FarmShare servers and used via a web browser.

IRkernel is available as part of the prebuilt Jupyter environment accessible via the Jupyter installation guide.

Links

Some other departments have some other more detailed examples:

building our local R

Here's how I usually do it.

2014-07-10

R 3.1.1 released today, I compiled it as chekh on corn40 (Ubuntu 13.10)

R is now configured for x86_64-unknown-linux-gnu

  Source directory:          .
  Installation directory:    /usr/local

  C compiler:                gcc -std=gnu99  -g -O2
  Fortran 77 compiler:       gfortran  -g -O2

  C++ compiler:              g++  -g -O2
  C++ 11 compiler:           g++  -std=c++11 -g -O2
  Fortran 90/95 compiler:    gfortran -g -O2
  Obj-C compiler:	     gcc -g -O2 -fobjc-exceptions

  Interfaces supported:      X11, tcltk
  External libraries:        readline, ICU, lzma
  Additional capabilities:   PNG, JPEG, TIFF, NLS, cairo
  Options enabled:           shared R library, shared BLAS, R profiling

  Recommended packages:      yes
  • make
  • write /farmshare/software/mf/saucy/r/3.1.1.lua
  • also added rstudio

2015-02-03

Added R 3.1.2 as above to Ubuntu 14.04.

2015-07-13

As chekh on corn25 (oldest CPU)

 cd /farmshare/software/free/r
 wget http://cran.r-project.org/src/base/R-3/R-3.2.1.tar.gz
 tar zxvf R-3.2.1.tar.gz
 cd R-3.2.1
 ./configure --enable-R-shlib
 make

lapack issues

If you see messages like:

  unable to load shared object '/usr/lib/R/modules//lapack.so':

most likely you're mixing R versions and libraries.

Double check that you are not setting R library path to point to directories with older libraries.

This test script should run fine if you have everything set correctly

$ cat lapack.r 
data(iris)
zz = lm(Sepal.Length ~., data = iris) 
summary(zz)

$ R --no-save < lapack.r 

links

Personal tools
Toolbox
LANGUAGES