2011
Nageswara Rao Janapala, "Crash Energy Absorption of Kevlar Fabric Composite Structures".
2008
Sungwon Ha, "Modeling Lamb Wave Propagation Induved by Adhesively Bonded PZTs on Thin Plates".
Alexi Rakow, "A Structural Health Monitoring Fastener for Tracking Fatigue Crack Growth in Bolted Metallic Joints".
2007
Johannes Markmiller, "Quantification and Optimization of a Structural Health Monitoring Sytstem for Impact Detection in Composite Structures".
2006
Nathan D. Flesher, "Crach Energy Absorption of Braided Composite Tubes".
Andrew C. Kim, "A Rapid Method for Identifying and Characterizing Structural Impacts Using Distributed Sensors: An Application for Automotive Pedestrian Protection".
2005
Hian-Leng Chan, "Detection of Bond Deterioration in Reinforced Concere Using Active Sensing Technique".
Jonghyun Park, "Impact Identification in Structures Using a Sensor Network: The System Identification Approach".
Jinkyu Yang, "Structural Health Monitoring Technology for Bolted Carbon-carbon Thermal Protection Panels".
Cole K. Corbin, "Burst Failure Prediction of Composite Flywheel Rotors: A Progressive Damage Approach via Stiffness Degradation".
2004
Eric Blaise, "Built-in Diagnostics for Sandwich Structures under Extreme Temperatures".
Roberto Dugnani, "Impedence-based Diagnostic System for in vivo Atherosclerotic Plaque Characterization".
2003
Sarah M. Brennan, "Modeling the Mechanical Characteristics and On-Snow Performance of Snowboards".
Taehan Kim, "Design of Composite Flywheel Rotors with Soft Cores".
Jeong-Beom Ihn, "Built-in Diagnostics for Monitoring Fatigue Crack Growth in Aircraft Structures".
Hansong Huang, "Composite Materials Failure Prediction Using Dissipated Energy Method".
2002
Fan Wu, "A Built-in Active Sensing Diagnostic System for Reinforced Concrete Structures".
2001
Akira Kuraishi, "Durability Analysis of Composite Structures Using the Accelerated Testing Methodology".
Michael Thomas Hicks, "Design of a Carbon Fiber Composite Grid Structure for the Glast Spacecraft".
Calvin S. Wang, "Built-in Diagnostics for Impact Damage Identification in Composite Structure".
Shawn J. Beard, "Energy Absorption of Braided Composite Tubes".
Dongyup Han, "Design and Manufacturing of Interlocked Composite Grids".
2000
Alessandro Zago, "Life Prediction of Short Fiber Composites".
Walter J. Stevens, "A Stent-Graft for Aortic Aneurysms".
Robert E. Seydel, "Impact Identification of Stiffened Composite Panels".
1999
Cheng-Huat Ong, "Composite Wind Turbine Blades".
Alison A. Nordt, "Design of Alpine Skis".
Mark Lin, "Composite Structures with Built-in Piezoceramics".
1998
John Jai, "Reinforcing Masonry Walls with Composite Materials".
Steven W. Kirkpatrick, "Damage and Failure of Metal Matrix Composites".
Beomkeun Kim, "Core Material Types for Sandwich Structures".
Youn-Seo Roh, "Built-in Diagnostics for Identifying an Anomaly in a Plate".
Cheng P. Tan, "Simulation of 3-D Resin Transfer Molding".
1997
Carlos A. Camini, Jr., "Effect of Ply Waviness on the In-plane Stiffness of Laminates".
Hsien-Tang Sun, "Strength of Composite Double Lap Bolted Joints".
Khanh V. Trinh, "In-plane Tension Failure of Composite Shells".
Sung-Hoon Ahn, "Repair of Composite Laminates".
Sangwook Sihn, "Failure of Bonded Joints".
1996
Toru Itoh, "Strain Measurement with Microsensors".
Philippe M. Manne, "Design Optimization of Composite Plates".
Michael Tracy, "Identifying Impacts in Composite Plates with Piezoelectric Sensor".
Tracy B. Colwell, "Manufacture and Application of Composites Grid Structures".
Patrick S. Johnson, "Damage Accumulation and Failure in Laminated Composites".
Youssef M. Ismail, "Interactive Simulation of Resin Transfer Molding".
Andrew S. Fine, "Design of Composite Laminates for Strength, Weight, and Manufacturability".
1995
Deborah J. Kelsey, "Composite Implant for Bone Replacement".
Steven M. Huybrechts, "Analysis and Behavior of Grid Structures".
Nobuyuki Tsuji, "The Drapability of Alighned Discontinuous Fiber Composites".
Kuo-Shih Liu, "Model for an In-situ Consolidation of Thermoplastic Composites".
Seng-Guan Lee, "Impact Damage Resistance of Laminated Composites with Interleaves".
Regis J. van Steenkiste, "Theory of Fiber Optic Strain and Temperature Sensors".
1994
Hong-Ji Chen, "Analysis and Optimum Design of Composite Grid Structures".
Hugo Sarrazin, "Thermochemical and Mechanical Aspects of Composite Tape Laying".
Jeffrey A. Kurland, "Strength Optimization of Laminated Composite Structures".
1993
Chang-Li Hung, "Response of Mechanically Fastened Composite Joints".
Keeyoung Choi, "An Impact Load Identification Method Using Distributed Sensors".
Hasan Yildiz, "Composites Hip Prosthesis Design".
Charles H. Keilers, Jr., "Damage Identification in Composites".
Steven L. Donaldson, "Monitoring Structural Integrity".
Christian U. Dahlen, "Delamination Growth in Composites".
Iqbal Shahid, "Progressive Failure of Laminated Composites".
David B. Koconis, "Shape Control of Composite Plates and Shells".
1992
Kisoo Kim, "Fabry-Perot Temperature and Strain Sensors".
Levent Karaoglan, "Axial Impact of Composites".
Jocelyn M. Patterson, "Composite Cylinders under Hygrothermal and Mechanical Loads".
Sheng Liu, "Damage Mechanics of Cross-ply Laminates".
Chin Fang, "Design of Composite Laminates by a Monte Carlo Method".
José L. Pérez, "Progressive Failure in Cross-ply Composite Laminates".
1991
Susan C. Mantell, "Manufacturing Process Models for Thermoplastic Matrix Composites".
Zafer S. Kutlu, "Compression Response of Laminated Composites Containing Multiple Delaminations".
Scott R. Finn, "Delaminations in Composites under Static or Impact Loads".
1990
Hyun Yun Choi, "Effect of Low Velocity Impact of Laminated Composites".
Hugh L.N. McManus, "High Temperature Thermomechanical Behavior of Composites".
Peter R. Ciriscioli, "An Expert System for Autoclave Curing of Composites".
1989
Scott O. Peck, "Compression Behavior of Delaminated Composite Plates".
Ehoud Graff, "Mechanical Behavior of Thick, Curved Laminated Composites".
Larry B. Lessard, "Compression Failure in Laminated Composites Containing an Open Hole".
Soo-Yong Lee, "Filament Winding Process Model".
Emilio P. Calius, "Filament Winding of Composite Cylinders".
1988
Sung-Kyu Ha, "Mechanical Behavior of Laminated Composites at Elevated Temperatures".
Andrew S. Bicos, "Free Damped Vibration of Composite Plates and Shells".
Kawrence E. Doxsee, Jr., "Hygrothermal Deformations of Laminated Composite Shells".
1986
Hsi-Yung T. Wu, "Impact Damage of Composites".
Michael C. McGary, "Separation of Airborne and Structureborne Noise".